Combined Flow Closed Type Cooling Tower Industrial Water Cooling Tower

Product Description

Product Parameters

Product Name	Combined Flow Closed Cooling Tower(Single Side Into Wind)
Model No.	MSTFBS-50
Cooling Capacity	250,000 Kcal/h
Flow Rate	50 m³/h
Spray Pump	Power	1.5 kw
	Flow Rate	45 m³/h
Fan	Power	2.2 kw
	Qty.	1
Pipe Size	Inlet / Outlet	DN80
	Supply	DN25
	Sewage	DN25
Dimension	2500*2300*3350 mm
Weight	Net Weight	1650 kg
	Operating Weight	3400 kg

Specifications for other models are shown in the table below

Technical Parameters of Combined-flow Closed type(single side into wind)
Model	Cooling Capacity (K cal/h)	Flow Rate (m³/h)	Spray Pump		Fan		Pipe Size			Dimension	Weight(approx)
			Power (kw)	Flow rate (m³/h)	Power(kw)	Qty.	Inlet/ outlet	Supply	Sewage	L*W*H (mm)	Net weight (kg)	Operating weight (kg)
MSTFBS-50	250000	50	1.5	45	2.2	1	DN80	DN25	DN25	2500*2300*3350	1650	3400
MSTFBS-65	325000	65	2.2	60	2.2	2	DN80	DN25	DN25	3100*2300*3750	1900	4120
MSTFBS-80	400000	80	2.2	60	3	2	DN80	DN25	DN25	3400*2400*4200	2650	6200
MSTFBS-100	500000	100	2.2	114	3	2	DN80	DN25	DN25	3400*2400*4200	2820	6400
MSTFBS-125	625000	125	3.7	140	4	2	DN125	DN32	DN32	4000*3000*4250	3400	8800
MSTFBS-150	750000	150	3.7	140	5.5	2	DN150	DN32	DN32	4000*3000*4630	3750	9200
MSTFBS-175	875000	175	5.5	160	5.5	2	DN200	DN40	DN40	4050*3000*4630	3950	9500
MSTFBS-200	1000000	200	5.5	160	5.5	3	DN200	DN40	DN40	5810*3000*4630	4520	12900
MSTFBS-250	1250000	250	5.5	160	7.5	3	DN200	DN40	DN40	5810*3000*4650	4980	13100

 

Technical Parameters of Combined-flow Closed type(double side into wind)
Model	Cooling Capacity (K cal/h)	Flow Rate (m³/h)	Spray Pump			Fan	Pipe Size			Dimension	Weight(approx)
			Power (kw)	Flow rate (m³/h)	Qty.	Power (kw)	Inlet/ outlet	Supply	Sewage	L*W*H (mm)	Net weight (kg)	Operating weight (kg)
MSTFBD-175	875000	175	2.2	60	2	11	DN80*2	DN40	DN40	5700*3000*4660	3900	9500
MSTFBD-200	1000000	200	2.2	114	2	11	DN100*2	DN40	DN40	6400*3200*4660	4300	10200
MSTFBD-250	1250000	250	3.7	140	2	15	DN125*2	DN40	DN40	6800*3200*4950	4900	12500
MSTFBD-300	1500000	300	3.7	140	2	15	DN150*2	DN40	DN40	7300*3300*4950	5100	13620
MSTFBD-350	1750000	350	5.5	160	2	22	DN200*2	DN40	DN40	7900*3400*5450	5620	14080
MSTFBD-400	2000000	400	5.5	160	2	37	DN200*2	DN40	DN40	8400*3600*5450	6100	15300

Product Description

" MSTFB " has a huge inside spare space which convenient for people to get into maintenance and repair. This type's advantages are high work efficiency and avoiding scaling, also apply to the high cooling temperature (35ºC-50 ºC)or large cooling range(△T=5-20ºC)

 

The Combined Flow Cooling Towers is also called "mixed flow closed cooling tower", referred to as "mixed flow", because the water spray and hot air are mixed in the direction, the spray water flows from top to bottom, the wind is divided into two channels, and a part of the cold air It flows from top to bottom, and the other part enters horizontally from the tail, and the temperature of the spray water is reduced through the cross heat exchange between the filler and the spray water.

Working Principle

The heated working fluid is flowing inside of the coil, which is en-wrapped by spray water on the outside. The heat of water is conducted by coil and become the saturated vapor when meet the water and air. The heat is exhausted out of the tower by the fan, and the water is collected back to the water tank for circulating. The spray water is cooled down when pass the PVC fills in the process of circulation, and flows in the same direction with the inlet cold air, and the coil mainly cooled by sensible heat conduction. So this type cooling tower is wildly used for high temperature cooling media.

 

Advantage

1. Double sides into wind

Cold air inlet from the top and side of the tower, cooling coils are layout in two sides, maximize the fan size. Enhance the air circulation, cooling capacity is more efficient.

2. Avoiding scaling

The cooling coils install up above the PVC fills, inlet cold air flows in the same direction with the spray water, so the spray water can complete cover the cooling coils and will avoid formation of dry point to form scale.

3. Low noise, based on low revolving speed with wide leaf fan. Vulnerable parts using famous brand, low failure rate,cheap maintenance cost.

4. High air duct design exhaust system to ensure ventilation quality, fast heat dissipation, ensure the cooling effect.

5. Convenient maintenance

Modular design is easy to assemble, disassemble and service. There is a maintenance passage inside tower, it is convenient for staff to entrance to examine and repair.
 

Project Cases

Main Raw Materials

 

Factory

 

Packaging & Shipping

Certifications

Why Chose Us

Wuxi Master Cooling Machinery Manufacturing Co , Ltd is a professional manufacturer of cooling system . Our company is located in Wuxi national industrial park , we have convenient transportation and elegant environment , with modern factory , advanced technologyand equipments.
Our mainly productions are closed cooling tower , opened cooling tower , evaporative condenser , chiller , RO system and other accessory parts . Our products are widely used inelectric power , chemical industrial , metallurgy , cooling , light industrial , civil facilities andother fieldsWe have an excellent scientific research and development team whom onstantly desian new products always more efficient and more innovative in order to meet the different needs from different customers.
Our core competencies are the reasonable price with superior quality and also our products own high efficiency , environmental protection , easy installation , operation and maintenance , long service life and what matters most is that we pay more attention to customers feelings .