Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Technical Parameters of Combined-flow Closed type(single side into wind) | ||||||||||||
Model | Cooling Capacity (K cal/h) |
Flow Rate (m³/h) |
Spray Pump | Fan | Pipe Size | Dimension | Weight(approx) | |||||
Power (kw) |
Flow rate (m³/h) |
Power(kw) | Qty. | Inlet/ outlet |
Supply | Sewage | L*W*H (mm) |
Net weight (kg) |
Operating weight (kg) |
|||
MSTFBS-50 | 250000 | 50 | 1.5 | 45 | 2.2 | 1 | DN80 | DN25 | DN25 | 2500*2300*3350 | 1650 | 3400 |
MSTFBS-65 | 325000 | 65 | 2.2 | 60 | 2.2 | 2 | DN80 | DN25 | DN25 | 3100*2300*3750 | 1900 | 4120 |
MSTFBS-80 | 400000 | 80 | 2.2 | 60 | 3 | 2 | DN80 | DN25 | DN25 | 3400*2400*4200 | 2650 | 6200 |
MSTFBS-100 | 500000 | 100 | 2.2 | 114 | 3 | 2 | DN80 | DN25 | DN25 | 3400*2400*4200 | 2820 | 6400 |
MSTFBS-125 | 625000 | 125 | 3.7 | 140 | 4 | 2 | DN125 | DN32 | DN32 | 4000*3000*4250 | 3400 | 8800 |
MSTFBS-150 | 750000 | 150 | 3.7 | 140 | 5.5 | 2 | DN150 | DN32 | DN32 | 4000*3000*4630 | 3750 | 9200 |
MSTFBS-175 | 875000 | 175 | 5.5 | 160 | 5.5 | 2 | DN200 | DN40 | DN40 | 4050*3000*4630 | 3950 | 9500 |
MSTFBS-200 | 1000000 | 200 | 5.5 | 160 | 5.5 | 3 | DN200 | DN40 | DN40 | 5810*3000*4630 | 4520 | 12900 |
MSTFBS-250 | 1250000 | 250 | 5.5 | 160 | 7.5 | 3 | DN200 | DN40 | DN40 | 5810*3000*4650 | 4980 | 13100 |
Technical Parameters of Combined-flow Closed type(double side into wind) | ||||||||||||
Model | Cooling Capacity (K cal/h) |
Flow Rate (m³/h) |
Spray Pump | Fan | Pipe Size | Dimension | Weight(approx) | |||||
Power (kw) |
Flow rate (m³/h) |
Qty. | Power (kw) |
Inlet/ outlet |
Supply | Sewage | L*W*H (mm) |
Net weight (kg) |
Operating weight (kg) |
|||
MSTFBD-175 | 875000 | 175 | 2.2 | 60 | 2 | 11 | DN80*2 | DN40 | DN40 | 5700*3000*4660 | 3900 | 9500 |
MSTFBD-200 | 1000000 | 200 | 2.2 | 114 | 2 | 11 | DN100*2 | DN40 | DN40 | 6400*3200*4660 | 4300 | 10200 |
MSTFBD-250 | 1250000 | 250 | 3.7 | 140 | 2 | 15 | DN125*2 | DN40 | DN40 | 6800*3200*4950 | 4900 | 12500 |
MSTFBD-300 | 1500000 | 300 | 3.7 | 140 | 2 | 15 | DN150*2 | DN40 | DN40 | 7300*3300*4950 | 5100 | 13620 |
MSTFBD-350 | 1750000 | 350 | 5.5 | 160 | 2 | 22 | DN200*2 | DN40 | DN40 | 7900*3400*5450 | 5620 | 14080 |
MSTFBD-400 | 2000000 | 400 | 5.5 | 160 | 2 | 37 | DN200*2 | DN40 | DN40 | 8400*3600*5450 | 6100 | 15300 |
" MSTFB " has a huge inside spare space which convenient for people to get into maintenance and repair. This type's advantages are high work efficiency and avoiding scaling, also apply to the high cooling temperature (35ºC-50 ºC)or large cooling range(△T=5-20ºC)
The Combined Flow Cooling Towers is also called "mixed flow closed cooling tower", referred to as "mixed flow", because the water spray and hot air are mixed in the direction, the spray water flows from top to bottom, the wind is divided into two channels, and a part of the cold air It flows from top to bottom, and the other part enters horizontally from the tail, and the temperature of the spray water is reduced through the cross heat exchange between the filler and the spray water.
Working Principle
The heated working fluid is flowing inside of the coil, which is en-wrapped by spray water on the outside. The heat of water is conducted by coil and become the saturated vapor when meet the water and air. The heat is exhausted out of the tower by the fan, and the water is collected back to the water tank for circulating. The spray water is cooled down when pass the PVC fills in the process of circulation, and flows in the same direction with the inlet cold air, and the coil mainly cooled by sensible heat conduction. So this type cooling tower is wildly used for high temperature cooling media.
Advantage
1. Double sides into wind
Cold air inlet from the top and side of the tower, cooling coils are layout in two sides, maximize the fan size. Enhance the air circulation, cooling capacity is more efficient.
2. Avoiding scaling
The cooling coils install up above the PVC fills, inlet cold air flows in the same direction with the spray water, so the spray water can complete cover the cooling coils and will avoid formation of dry point to form scale.
3. Low noise, based on low revolving speed with wide leaf fan. Vulnerable parts using famous brand, low failure rate,cheap maintenance cost.
4. High air duct design exhaust system to ensure ventilation quality, fast heat dissipation, ensure the cooling effect.
5. Convenient maintenance
Modular design is easy to assemble, disassemble and service. There is a maintenance passage inside tower, it is convenient for staff to entrance to examine and repair.
Wuxi Master Cooling Machinery Manufacturing Co , Ltd is a professional manufacturer of cooling system . Our company is located in Wuxi national industrial park , we have convenient transportation and elegant environment , with modern factory , advanced technologyand equipments.
Our mainly productions are closed cooling tower , opened cooling tower , evaporative condenser , chiller , RO system and other accessory parts . Our products are widely used inelectric power , chemical industrial , metallurgy , cooling , light industrial , civil facilities andother fieldsWe have an excellent scientific research and development team whom onstantly desian new products always more efficient and more innovative in order to meet the different needs from different customers.
Our core competencies are the reasonable price with superior quality and also our products own high efficiency , environmental protection , easy installation , operation and maintenance , long service life and what matters most is that we pay more attention to customers feelings .