Customized PVC 1520 mm Marley Cross-Flow Cooling Tower Fills Cooling Tower Packing

• Customization: Available
• Cooling Method: Direct Cooling
• Certification: ISO, CE
• Model NO.: Marley 1520mm PVC
• Condition: New
• Product Name: Cooling Tower Packing
• Item No: Marley 1520mm PVC
• Width: 1520 mm
• Length: 206mm*N / The Length Is Customizable
• Thickness of Raw Materials: 0.32-0.6mm / The Material Thickness Is Customizabl
• Distance Between Each Piece: 20mm
• Cold-Resistant: -20ºC
• Heat-Resistant: 65ºC / 100ºC
• Material: PVC
• Specification: Marley 1020mm PVC
• Trademark: Master Cooling
• Origin: China
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 100.000kg

Product Description

 

Product Parameters

 

Product Name	Marley Cross Flow Cooling Tower Packing
Product Material	PVC / PP
Width	750mm, 920mm, 1020mm, 1220mm, 1520mm
Length	206*N mm / The length is customizable
Thickness	0.32-0.6mm / The material thickness is customizable
Distance between each piece	20mm
Cold-resistant	-20ºC
Heat-resistant	65ºC / 100ºC

Product Description

The Marley cross-flow cooling tower packing is a key component in the cooling tower used to facilitate heat exchange.

Characteristics

·High heat exchange efficiency: It is usually of the thin-film type, with fine protruding corrugations on the surface. This can increase the contact area between water and air, effectively increase the heat dissipation amount, extend the residence time of the cooling water, and improve the heat exchange efficiency.

·Good hydrophilicity: The surface presents a rough yet relatively smooth plane, with good hydrophilicity. This allows water to spread better on the surface of the packing, which is conducive to heat exchange.

·Low ventilation resistance: With a reasonable design, air can pass through smoothly, and the wind resistance coefficient is small. Without affecting ventilation, it ensures sufficient contact between air and water.
·Stable performance: It has the characteristics of being not easy to deform, resistant to high temperatures, and anti-aging. Moreover, it has good flame retardancy, can maintain a good working state for a long time, and has a relatively long service life.

Materials

The commonly seen material is polyvinyl chloride (PVC), which has the advantages of good chemical stability and a
relatively low price, and can maintain good performance within a certain temperature range. For some with special requirements, materials such as chlorinated polyvinyl chloride (CPVC) or polypropylene (PP) may be used.

 

Specifications

There are various specifications available for selection. For example, the common widths are 750mm, 920mm, 1220mm, 1520mm, etc., and the length can be customized according to actual needs.

 

Application Fields

It is widely applied in many fields that require circulating water cooling, such as air conditioning cooling systems, refrigeration series, power generation, steam turbines, aluminum profile processing, air compressors, and industrial water cooling.

 

Installation Precautions

·Construction protection: Before construction, other equipment on the site should be protected, and construction material cloth should be laid on the waterproof layer of the floor.

·Removal of old materials: Turn off the power supply of the motor, remove the tie bars at the packing part of the cooling tower, and then remove the old packing and clean up the garbage inside the tower.

·Filling of new materials: When bonding, ensure that the contact points of the packing are on the same horizontal plane to ensure uniform and tight force during the crimping process.

·Cleaning inside the tower: Stack the packing in order inside the cooling tower. It is strictly prohibited to trample or squeeze it. Ensure that each stack and each layer of packing blocks are neatly arranged, and make sure that there are no gaps between the packing and the corners and around the columns. In difficult areas, the interval should not exceed 2mm. After that, restore the tie bars at the packing part of the cooling tower.

·Operation specifications: Assemble the blocks in the up-down direction and lay each layer flat on the top surface; when installation, maintenance, and other work need to be carried out on the packing, the operation must be carried out on a flat plate, and it is strictly prohibited to trample on the packing; during the entire construction process, welding operations above the packing are strictly prohibited. Fire prevention measures should be taken when necessary.

Company Profile

Wuxi Master Cooling Machinery Manufacturing Co , Ltd is a professional manufacturer of cooling system .

Our company is located in Wuxi national industrial park , we have convenient transportation and elegant environment , with modern factory , advanced technologyand equipments. Our mainly productions are closed cooling tower , opened cooling tower , evaporative condenser , chiller, RO system and other accessory parts . Our products are widely used inelectric power , chemical industrial , metallurgy , cooling, light industrial , civil facilities andother fieldsWe have an excellent scientific research and development team whom onstantly desian new products always more efficient and more innovative in order to meet the different needs from different customers.

Our core competencies are the reasonable price with superior quality and also our products own high efficiency , environmental protection , easy installation , operation and maintenance , long service life and what matters most is that we pay more attention to customers feelings .

Certifications